Black Decker CCS919 Chainsaw Manual

The Black Decker CCS919 is a powerful and efficient chainsaw designed for cutting through wood with ease. It features a 20V MAX lithium-ion battery for cordless operation, a 10-inch bar and chain for versatile cutting, and a lightweight design for easy handling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Maintenance 7. Troubleshooting

Features at a Glance

Key components: 20V MAX lithium-ion battery, 10-inch bar and chain, automatic oiling system, tool-free chain tensioning, and lightweight design.

Feature	Description
20V MAX Lithium-Ion Battery	Provides cordless convenience and longer run time.
10-Inch Bar and Chain	Ideal for cutting small to medium-sized branches.
Automatic Oiling System	Keeps the chain lubricated for optimal performance.
Tool-Free Chain Tensioning	Allows for easy adjustments without the need for tools.
Lightweight Design	Enhances maneuverability and reduces user fatigue.

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection. Ensure the area is clear of bystanders before operating the chainsaw.

Read the manual thoroughly before use.
Inspect the chainsaw for any damage before operation.
Keep hands and feet away from the cutting area.
Never operate the chainsaw while under the influence of drugs or alcohol.

WARNING! Failure to follow safety instructions may result in serious injury.

First-Time Setup

Before using the chainsaw for the first time, ensure the battery is fully charged and the chain is properly tensioned.

Insert the battery into the chainsaw until it clicks into place.
Check the chain tension and adjust if necessary.
Fill the oil reservoir with bar and chain oil.
Perform a test cut on a small piece of wood to ensure proper operation.

CAUTION! Always ensure the chainsaw is turned off when making adjustments.

Specifications

Power Source: 20V MAX Lithium-Ion Battery.
Bar Length: 10 inches.
Weight: 5.5 lbs.
Chain Speed: 5.5 m/s.
Oiling System: Automatic.
Warranty: 2 years limited warranty.

Controls and Settings

The chainsaw features a trigger switch for operation, a safety lock to prevent accidental starts, and an oil reservoir cap for easy access.

Trigger Switch: Press to operate the chainsaw.

Safety Lock: Engage before pulling the trigger to ensure safe operation.

Maintenance

Regular maintenance is essential for optimal performance and longevity of the chainsaw.

Clean the chainsaw after each use to remove debris.
Check and replace the chain if it becomes dull or damaged.
Ensure the oil reservoir is filled before each use.
Store the chainsaw in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Battery not charged	Charge the battery fully before use.
Chain is not moving	Chain tension too tight	Adjust the chain tension to the proper level.
Excessive oil leakage	Oil reservoir cap not secured	Check and tighten the oil reservoir cap.
Chain dulls quickly	Improper cutting technique	Review cutting techniques and maintain chain sharpness.

Service: For further assistance, contact customer support at 1-800-234-5678.